Description
Using the USB 3.0 Compliance Test with M1 Waveform Tools provides you with an expert solution to your compliance testing needs.
M1 Waveform Tools is compatible with every real-time Agilent, Tektronix, LeCroy, and Yokogawa scope on the market, including
the new Agilent 90000 and Tek 70000 series.
By going with the M1 solution, if you don't meet your numbers you have the full power of M1 available to figure out what the problem
is. If you need help, you can collaborate instantly by packaging up your waveform and sending it to
your local signal integrity guru.
Most major signal standards are included, for free, with every installation of M1. Regardless of what standard you are working with,
you will be ready to begin testing immediately with M1.
Specifications/Details
Spec Level:
USB 3.0
App Update Level/Date: 1.1, August 2010
Best Practices Revision Level: 4
Minimum M1 version required: v6.02.2
App Encryption:
none
Measurements Made:
- Table 6-9. SSC Parameters
- Table 6-10. Transmitter Normative Electrical Parameters
- Table 6-12. Normative Transmitter Eye Mask at Test Point TP1
Assumptions:
- Testing will require one differential probe
Features
- Not Applicable for this App
Comments
Feedback
Provide
feedback to ASA about this App
