Personal Information
*All fields marked with a star are required.
M1/Scope Information
*The Serial Number can be found on the tag attached to your Security Key. This field is only needed for M1 OT Ultimate registration.
**This code must start with 0x100 for all products except M1 Reader and M1 Waveform Viewer.
By clicking on 'Submit' below, you certify that the above information is correct to the best of your knowledge. You also certify that you have read and agree to all the terms of the Customer License Agreement that accompanies the software.
Please note that registrations are processed manually. While this usually takes less than one business day, please allow at least 5 business days for a reply.
Additional Information
How will this system be used? Please check all that apply. Measure a Clock Signal Measure a Data Signal Characterize Test Equipment R&D Test Equipment Device Characterization Production Test Not Sure/Don't Know
Please check all that apply.
What kind of devices/systems will you be measuring? Please check all that apply. PLL - Jitter Out PLL - Jitter Tolerance PLL - Spread Spectrum Issues Fibre-channel Gigabit Ethernet Firewire/IEEE 1394 Rotating media/Read Channel Digital Audio Digital Video Not Sure/Don't Know Other Other High-Speed Serial Data
If other: If other High Speed Serial Data:
What are the characteristics of the highest speed waveform you expect to measure over the next year? Rise Time: < 125 psec 125 - 250 psec 250 - 500 psec 500 - 1000 psec 1000 - 2500 psec > 2.5 nsec Frequency: < 100 Mhz 100 - 500 MHz 500 MHz - 1 GHz 1.0 - 2.0 GHz 2.0 - 3.5 GHz 3.5 - 5.0 GHz 5.0 - 10.0 GHz > 10.0 GHz Waveform Thresholding: Single Ended Differential
Are there any future standards that your group expects to measure over the next year?
What are your top 3 reasons for using M1?
How would you rate your overall experience with ASA (as compared to your other test and measurement vendors) in evaluating and purchasing this system?
Do you have any other comments?
Please subscribe me to the ASA newsletter
