M1 Apps™
Versatility without limits
All M1 Apps™
|
Compliance Tests
DDR Compliance Test
DDR
|
M1 TestScript™ DDR compliance test described in the document JESD 82.
by: ASA
Free
|
DDR2 Compliance Test
DDR2
|
M1 TestScripts™ (one for each operational speed) with additional special measurement DLLs to perform the DDR2 compliance test described in the document JESD 79-2E, April, 2008.
by: ASA
Free
|
DDR3 Compliance Test
DDR3
|
M1 TestScripts™ (one for each operational speed) with additional special measurement DLLs to perform the DDR3 compliance test described in the document JESD 79-3D, November, 2008.
by: ASA
Free
|
DisplayPort Compliance Test
DisplayPort
|
M1 TestScript™ with special measurements to perform the DisplayPort compliance test described in the document VESA 1.1a.
by: ASA
Free
|
DRCG Compliance Test
DRCG
|
M1 TestScript™ to perform the DRCG compliance test described in the Texas Instruments document CDCR83A.
by: ASA
Free
|
DVI Compliance Test
DVI
|
M1 TestScripts™ (one for each operational speed) with additional special measurement DLLs to perform the DVI compliance test.
by: ASA
Free
|
FBDIMM Compliance Test
FBDIMM
|
>M1 TestScript™ with additional special measurement DLLs to perform the FBDIMM compliance test described in the document JESD 8-18.
by: ASA
Free
|
FibreChannel Compliance Test
FibreChannel
|
>M1 TestScripts™ to perform the FibreChannel compliance test described in the document FC-PI 13.
by: ASA
Free
|
Gigabit Ethernet Compliance Test
Gigabit Ethernet
|
M1 TestScripts™ to perform the Gigabit Ethernet compliance test described in the IEEE document 802.3-2000.
by: ASA
Free
|
HDMI Compliance Test
HDMI
|
M1 TestScript™ to perform the HDMI compliance test described in the High-Definition Multimedia Interface Specification Version 1.3a.
by: ASA
Free
|
I2C Compliance Test
I2C
|
M1 TestScripts™ to perform the I2C compliance test version 3.
by: ASA
Free
|
Infiniband Compliance Test
Infiniband
|
M1 TestScript™ to perform the compliance test for Infiniband v1.1.
by: ASA
Free
|
PCI Express 1.0a and 2.0 Compliance Tests
PCIe
|
M1 TestScripts™ with additional special measurement DLLs to perform the PCI Express compliance test described in the documents Base Specification Revision 2.0, 20 December, 2006; Base Specification and CEM Specification Revision 1.0a, 15 April, 2003.
by: ASA
Free
|
Serial ATA Compliance Test
SATA
|
M1 TestScripts™ with additional special measurement DLLs to perform the Serial ATA compliance tests described in Serial ATA Revision 2.6, 15 February, 2007.
by: ASA
Free
|
USB 2.0 Compliance Test
USB
|
M1 TestScripts™ with additional special measurement DLLs to perform the USB 2.0 compliance test.
by: ASA
Free
|
USB 3.0 Compliance Test
USB 3.0
|
M1 TestScripts™ with additional special measurement DLLs to perform the USB 3.0 compliance test.
by: ASA
Free
|
XAUI Compliance Test
XAUI
|
M1 TestScript™ to perform the XAUI compliance test described in the document 802.3ae-2002.
by: ASA
Free
|
Special Measurements
DDR2 Bundle
DDR2
|
These are the DLLs used by the DDR2 Compliance Test written by ASA.
by: ASA
Free
|
DDR2: tDQSH/tDQSL/tDQSS
DDR2
|
This DLL performs the combined tDQSH/tDQSL/tDQSS measurements for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDQSH
DDR2
|
This DLL performs the DQS input HIGH pulse width measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDQSL
DDR2
|
This DLL performs the DQS input LOW pulse width measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDQSS
DDR2
|
This DLL performs the DQS latching rising transitions to associated clock edges measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDQSCK/tDSS/tDSH
DDR2
|
This DLL performs the combined tDQSCK/tDSS/tDSH measurements for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDQSCK
DDR2
|
This DLL performs the DQS output access time from CK measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDSS
DDR2
|
This DLL performs the DQS falling edge to CK setup time measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDSH
DDR2
|
This DLL performs the DQS falling edge hold time from CK measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tIS/tIH (CK)
DDR2
|
This DLL performs the combined tIS/tIH measurements for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tIS
DDR2
|
This DLL performs the Address and control input setup time measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tIH
DDR2
|
This DLL performs the Address and control input hold time measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDQSQ/tQH/tDIPW
DDR2
|
This DLL performs the combined tDQSQ/tQH/tDIPW measurements for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDQSQ
DDR2
|
This DLL performs the DQS-DQ skew for DQS and associated DQ signals measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tQH
DDR2
|
This DLL performs the DQ/DQS output hold time from DQS measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDIPW
DDR2
|
This DLL performs the DQ and DM input pulse width for each input measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDS1/tDH1
DDR2
|
This DLL performs the combined tDS1/tDH1 measurements for DDR2 (single-ended strobe) as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDS1
DDR2
|
This DLL performs the DQ and DM input setup time (single-ended strobe) measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDH1
DDR2
|
This DLL performs the DQ and DM input hold time (single-ended strobe) measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDS/tDH (DQS/DQS#)
DDR2
|
This DLL performs the combined tDS/tDH measurements for DDR2 differential DQS as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDS
DDR2
|
This DLL performs the DQ and DM input setup time (differential strobe) measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tDH
DDR2
|
This DLL performs the DQ and DM input hold time (differential strobe) measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tRPRE/tWPRE/tRPST/tWPST
DDR2
|
This DLL performs the combined tRPRE/tWPRE/tRPST/tWPST measurements for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tRPRE
DDR2
|
This DLL performs the Read preamble measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tWPRE
DDR2
|
This DLL performs the Write preamble measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tRPST
DDR2
|
This DLL performs the Read postamble measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tWPST
DDR2
|
This DLL performs the Write postamble measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: Overshoot (Cmd, Addr, DQ)
DDR2
|
This DLL performs the Overshoot measurement for DDR2 command, address, and data (DQ) lines as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: Undershoot (Cmd, Addr, DQ)
DDR2
|
This DLL performs the Undershoot measurement for DDR2 command, address, and data (DQ) lines as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: Overshoot (CK, DQS)
DDR2
|
This DLL performs the Overshoot measurement for DDR2 CK and data strobe (DQS) lines as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: Undershoot (CK, DQS)
DDR2
|
This DLL performs the Undershoot measurement for DDR2 CK and data strobe (DQS) lines as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tSRQse
DDR2
|
This DLL performs the tSRQse measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tAC
DDR2
|
ed by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tLZ/tHZ(DQ) min/max
DDR2
|
This DLL performs the tLZ/tHZ(DQ) min/max measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tLZ(DQ)
DDR2
|
This DLL performs the DQ low-impedance time from CK/CK# measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tHZ(DQ)
DDR2
|
This DLL performs the Data-out high-impedance time from CK/CK# measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tLZ(DQS) min/max
DDR2
|
This DLL performs the tLZ(DQS) min/max measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2: tLZ(DQS)
DDR2
|
This DLL performs the DQS/DQS# low-impedance time from CK/CK# measurement for DDR2 as
used by the DDR2 Compliance Test written by ASA. These measurements are part of the DDR2 Bundle. ASA strongly recommends that you get the complete DDR2 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2, DDR3: tERR(n) for n = 7, 8, 9, 10
tERR
|
This DLL performs the tERR(n) measurement for DDR2 and DDR3 as
used by the DDR2 and DDR3 Compliance Tests written by ASA. These measurements are part of the DDR2 Bundle and the DDR3 Bundle. ASA strongly recommends that you get the complete bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2, DDR3: tERR(n) for n = 11, 12, 13, 14
tERR
|
This DLL performs the tERR(n) measurement for DDR2 and DDR3 as
used by the DDR2 and DDR3 Compliance Tests written by ASA. These measurements are part of the DDR2 Bundle and the DDR3 Bundle. ASA strongly recommends that you get the complete bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2, DDR3: tERR(n) for n = 15, 16, 17, 18
tERR
|
This DLL performs the tERR(n) measurement for DDR2 and DDR3 as
used by the DDR2 and DDR3 Compliance Tests written by ASA. These measurements are part of the DDR2 Bundle and the DDR3 Bundle. ASA strongly recommends that you get the complete bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2, DDR3: tERR(n) for n = 19, 20, 21, 22
tERR
|
This DLL performs the tERR(n) measurement for DDR2 and DDR3 as
used by the DDR2 and DDR3 Compliance Tests written by ASA. These measurements are part of the DDR2 Bundle and the DDR3 Bundle. ASA strongly recommends that you get the complete bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2, DDR3: tERR(n) for n = 23, 24, 25, 26
tERR
|
This DLL performs the tERR(n) measurement for DDR2 and DDR3 as
used by the DDR2 and DDR3 Compliance Tests written by ASA. These measurements are part of the DDR2 Bundle and the DDR3 Bundle. ASA strongly recommends that you get the complete bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2, DDR3: tERR(n) for n = 27, 28, 29, 30
tERR
|
This DLL performs the tERR(n) measurement for DDR2 and DDR3 as
used by the DDR2 and DDR3 Compliance Tests written by ASA. These measurements are part of the DDR2 Bundle and the DDR3 Bundle. ASA strongly recommends that you get the complete bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2, DDR3: tERR(n) for n = 31, 32, 33, 34
tERR
|
This DLL performs the tERR(n) measurement for DDR2 and DDR3 as
used by the DDR2 and DDR3 Compliance Tests written by ASA. These measurements are part of the DDR2 Bundle and the DDR3 Bundle. ASA strongly recommends that you get the complete bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2, DDR3: tERR(n) for n = 35, 36, 37, 38
tERR
|
This DLL performs the tERR(n) measurement for DDR2 and DDR3 as
used by the DDR2 and DDR3 Compliance Tests written by ASA. These measurements are part of the DDR2 Bundle and the DDR3 Bundle. ASA strongly recommends that you get the complete bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2, DDR3: tERR(n) for n = 39, 40, 41, 42
tERR
|
This DLL performs the tERR(n) measurement for DDR2 and DDR3 as
used by the DDR2 and DDR3 Compliance Tests written by ASA. These measurements are part of the DDR2 Bundle and the DDR3 Bundle. ASA strongly recommends that you get the complete bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2, DDR3: tERR(n) for n = 43, 44, 45, 46
tERR
|
This DLL performs the tERR(n) measurement for DDR2 and DDR3 as
used by the DDR2 and DDR3 Compliance Tests written by ASA. These measurements are part of the DDR2 Bundle and the DDR3 Bundle. ASA strongly recommends that you get the complete bundle of Special Measurement Apps.
by: ASA
Free
|
DDR2, DDR3: tERR(n) for n = 47, 48, 49, 50
tERR
|
This DLL performs the tERR(n) measurement for DDR2 and DDR3 as
used by the DDR2 and DDR3 Compliance Tests written by ASA. These measurements are part of the DDR2 Bundle and the DDR3 Bundle. ASA strongly recommends that you get the complete bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3 Bundle
DDR3
|
These are the DLLs used by the DDR3 Compliance Test written by ASA.
by: ASA
Free
|
DDR3: tDQSH/tDQSL/tDQSS
DDR3
|
This DLL performs the combined tDQSH/tDQSL/tDQSS measurements for DDR3 as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDQSH
DDR3
|
This DLL performs the DQS/DQS# differential input high pulse width measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDQSL
DDR3
|
This DLL performs the DQS/DQS# differential input low pulse width measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDQSS
DDR3
|
This DLL performs the DQS/DQS# rising edge to CK/CK# rising edge measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDQSCK/tDSS/tDSH
DDR3
|
This DLL performs the combined tDQSCK/tDSS/tDSH measurements for DDR3 as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDQSCK
DDR3
|
This DLL performs the DQS rising edge output access time from rising CK measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDSS
DDR3
|
This DLL performs the DQS/DQS# falling edge setup time to CK/CK# rising edge measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDSH
DDR3
|
This DLL performs the DQS/DQS# falling edge hold time from CK/CK# rising edge measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tQSH/tQSL
DDR3
|
This DLL performs the combined tQSH/tQSL measurements for DDR3 as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tQSH
DDR3
|
This DLL performs the DQS/DQS# differential output high time measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tQSL
DDR3
|
This DLL performs the DQS/DQS# differential output low time measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tIS/tIH/tVAC for CK/DQS
DDR3
|
This DLL performs the combined tIS/tIH/tVAC for CK/DQS measurements for DDR3 as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tIS
DDR3
|
This DLL performs the Command and address setup time to Cl/CK# referenced to Vih(ac)/Vil(ac) levels measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tIH
DDR3
|
This DLL performs the Command and address hold time from CK/CK# referenced to Vih(dc)/Vil(dc) levels measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tVAC
DDR3
|
This DLL performs the required time above Vih(ac)/below Vil(ac) for valid transition measurement with detailed output for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDQSQ/tQH/tDIPW
DDR3
|
This DLL performs the combined tDQSQ/tQH/tDIPW measurements for DDR3 as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDQSQ
DDR3
|
This DLL performs the DQS to DQ skew per group per access measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tQH
DDR3
|
This DLL performs the DQ output hold time from DQS/DQS# measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDIPW
DDR3
|
This DLL performs the DQ and DM Input pulse width for each input measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDS/tDH/tVAC for DQ/DQS
DDR3
|
This DLL performs the combined tDS/tDH/tVAC for DQ/DQS measurements for DDR3 as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDS for DQ/DQS
DDR3
|
This DLL performs the tDS for DQ/DQS measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tDH for DQ/DQS
DDR3
|
This DLL performs the tDH for DQ/DQS measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tRPRE/tWPRE/tRPST/tWPST
DDR3
|
This DLL performs the combined tRPRE/tWPRE/tRPST/tWPST measurements for DDR3 as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tRPRE
DDR3
|
This DLL performs the DQS/DQS# differential READ preamble measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tWPRE
DDR3
|
This DLL performs the DQS/DQS# differential WRITE preamble measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tWPST/tRPST
DDR3
|
This DLL performs the DQS/DQS# differential READ or WRITE postamble measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: Overshoot (Cmd, Addr, DQ)
DDR3
|
This DLL performs the Overshoot measurement for DDR3 command, address, and data (DQ) lines as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: Undershoot (Cmd, Addr, DQ)
DDR3
|
This DLL performs the Undershoot measurement for DDR3 command, address, and data (DQ) lines as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: Overshoot (CK, DQS)
DDR3
|
This DLL performs the Overshoot measurement for DDR3 clock and data strobe (DQS) lines as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: Undershoot (CK, DQS)
DDR3
|
This DLL performs the Undershoot measurement for DDR3 clock and data strobe (DQS) lines as
used by the DDR3 Compliance Test written by ASA. These measurements are part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tSRQse min/max
DDR3
|
This DLL performs the tSRQse measurement for DDR3 single-ended signal lines as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tSRQse (detailed)
DDR3
|
This DLL performs the Single-ended output slew rate measurement with detailed output for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tLZ/tHZ for DQ
DDR3
|
This DLL performs the Combined tLZ/tHZ for DQ measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tLZ(DQ)
DDR3
|
This DLL performs the DQ low-impedance time from CK/CK# measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tHZ(DQ)
DDR3
|
This DLL performs the DQ high impedance time from CK/CK# measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tLZ/tHZ for DQS
DDR3
|
This DLL performs the Combined tLZ/tHZ for DQS measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tLZ(DQS)
DDR3
|
This DLL performs the DQS/DQS# low-impedance time (referenced from RL - 1) measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
DDR3: tHZ(DQS)
DDR3
|
This DLL performs the DQS and DQS# high-impedance time (referenced from RL + BL/2) measurement for DDR3 as
used by the DDR3 Compliance Test written by ASA. This measurement is part of the DDR3 Bundle. ASA strongly recommends that you get the complete DDR3 Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 2.0 Bundle
PCIe
|
These are the DLLs used by the PCIe 2.0 Compliance Test written by ASA.
by: ASA
Free
|
PCIe 2.0: TRX-MIN-PULSE
PCIe
|
This DLL measures the minimum single pulse applied at Rx measurement for PCIe 2.0 as used by the PCIe 2.0 Compliance Test written by ASA. This measurement is part of the PCIe 2.0 Bundle. ASA strongly recommends that you get the complete PCIe 2.0 Bundle of Special Measurement Apps
by: ASA
Free
|
PCIe 2.0: TRX-MIN-PULSE details
PCIe
|
This DLL measures the minimum single pulse applied at Rx measurement for PCIe 2.0 as used by the PCIe 2.0 Compliance Test written by ASA, and presents the details for use in examining problems with the signal. This measurement is part of the PCIe 2.0 Bundle. ASA strongly recommends that you get the complete PCIe 2.0 Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 2.0: TTX-RISE-FALL/TRF-MISMATCH/TMIN-PULSE
PCIe
|
This DLL measures the instantaneous lone pulse width, TX rise/fall mismatch, and transmitter rise/fall time parameters for PCIe 2.0 as used by the PCIe 2.0 Compliance Test written by ASA. This measurement is part of the PCIe 2.0 Bundle. ASA strongly recommends that you get the complete PCIe 2.0 Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 2.0: TTX-RISE-FALL
PCIe
|
This DLL performs the transmitter rise and fall time (min) measurement for PCIe 2.0 as used by the PCIe 2.0 Compliance Test written by ASA. This measurement is part of the PCIe 2.0 Bundle. ASA strongly recommends that you get the complete PCIe 2.0 Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 2.0: LSKEW
PCIe
|
This DLL performs the lane-to-lane skew measurement for PCIe 2.0 as used by the PCIe 2.0 Compliance Test written by ASA. This measurement is part of the PCIe 2.0 Bundle. ASA strongly recommends that you get the complete PCIe 2.0 Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 2.0: LSKEW details
PCIe
|
This DLL performs the lane-to-lane skew measurement for PCIe 2.0 as used by the PCIe 2.0 Compliance Test written by ASA, with detailed output for use in examining problems with the signal. This measurement is part of the PCIe 2.0 Bundle. ASA strongly recommends that you get the complete PCIe 2.0 Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 2.0: VRX-CM-AC-P
PCIe
|
This DLL performs the RX AC common mode voltage measurement for PCIe 2.0 as used by the PCIe 2.0 Compliance Test written by ASA. This measurement is part of the PCIe 2.0 Bundle. ASA strongly recommends that you get the complete PCIe 2.0 Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 2.0: VRX-MAX-MIN-RATIO
PCIe
|
This DLL performs the min/max pulse voltage on consecutive UI(VRX-MAX-MIN-RATIO) measurement for PCIe 2.0 as used by the PCIe 2.0 Compliance Test written by ASA. This measurement is part of the PCIe 2.0 Bundle. ASA strongly recommends that you get the complete PCIe 2.0 Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 2.0: VTX-DC-CM/VTX-CM-DC-LINE-DELTA
PCIe
|
This DLL performs the combined transmitter DC common-mode voltage (VTX-DC-CM) and Absolute Delta of DC Common
Mode Voltage between D+ and D- (VTX-CM-DC-LINE-DELTA) measurements for PCIe 2.0 as used by the PCIe 2.0 Compliance Test written by ASA. This measurement is part of the PCIe 2.0 Bundle. ASA strongly recommends that you get the complete PCIe 2.0 Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 2.0: VTX-CM-AC-P (2.5 GT/s)
PCIe
|
This DLL performs the TX AC common mode voltage (2.5 GT/s) measurements for PCIe 2.0 as used by the PCIe 2.0 Compliance Test written by ASA. This measurement is part of the PCIe 2.0 Bundle. ASA strongly recommends that you get the complete PCIe 2.0 Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 2.0: VTX-CM-AC-P (5.0 GT/s)
PCIe
|
This DLL performs the TX AC common mode voltage (5.0 GT/s) measurements for PCIe 2.0 as used by the PCIe 2.0 Compliance Test written by ASA. This measurement is part of the PCIe 2.0 Bundle. ASA strongly recommends that you get the complete PCIe 2.0 Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 1.0a Bundle
PCIe
|
These are the DLLs used by the PCIe 1.0a Compliance Test written by ASA.
by: ASA
Free
|
PCIe 1.0a: VRX-DIFFp-p/VRX-CM-ACp
PCIe
|
This DLL performs the Differential Input Peak to Peak Voltage and AC Peak Common Mode Input Voltage measurements for PCIe 1.0a as used by the PCIe 1.0a Compliance Test written by ASA. This measurement is part of the PCIe 1.0a Bundle. ASA strongly recommends that you get the complete PCIe 1.0a Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 1.0a: VTX-CM-ACp/VTX-CM-DC-LINE-DELTA/VTX-IDLE-DIFFp
PCIe
|
This DLL performs the RMS AC Peak Common Mode Output Voltage (VTX-CM-ACp), Absolute Delta of DC Common Mode Voltage between D+ and D- (VTX-CM-DC-LINE-DELTA), and Electrical Idle Differential Peak Output Voltage (VTX-IDLE-DIFFp) measurements for PCIe 1.0a as used by the PCIe 1.0a Compliance Test written by ASA. This measurement is part of the PCIe 1.0a Bundle. ASA strongly recommends that you get the complete PCIe 1.0a Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 1.0a: VRB Under Ringback
PCIe
|
This DLL performs the Under Ringback (VRB) measurement for PCIe 1.0a as used by the PCIe 1.0a Compliance Test written by ASA. This measurement is part of the PCIe 1.0a Bundle. ASA strongly recommends that you get the complete PCIe 1.0a Bundle of Special Measurement Apps.
by: ASA
Free
|
PCIe 1.0a: VRB Over Ringback
PCIe
|
This DLL performs the Over Ringback (VRB) measurement for PCIe 1.0a as used by the PCIe 1.0a Compliance Test written by ASA. This measurement is part of the PCIe 1.0a Bundle. ASA strongly recommends that you get the complete PCIe 1.0a Bundle of Special Measurement Apps.
by: ASA
Free
|
DisplayPort Bundle
PCIe
|
These are the DLLs used by the DisplayPort Compliance Test written by ASA.
by: ASA
Free
|
DP: VTX-DIFFp-p/VTX-PREEMP-RATIO/VTX-DC-CM
DisplayPort
|
This DLL performs the Differential Peak-to-peak Output Voltage (VTX-DIFFp-p), VTX-PREEMP-RATIO, and TX DC Common Mode Voltage (VTX-DC-CM) measurements for DisplayPort as used by the DisplayPort Compliance Test written by ASA. This measurement is part of the DisplayPort Bundle. ASA strongly recommends that you get the complete DisplayPort Bundle of Special Measurement Apps.
by: ASA
Free
|
DP: VTX-DC-CM
DisplayPort
|
This DLL performs the TX DC common mode voltage measurement for DisplayPort as used by the DisplayPort Compliance Test written by ASA. This measurement is part of the DisplayPort Bundle. ASA strongly recommends that you get the complete DisplayPort Bundle of Special Measurement Apps.
by: ASA
Free
|
DP: fSSC/SSCtol
DisplayPort
|
This DLL performs the Spread Spectrum parameters measurement for DisplayPort as used by the DisplayPort Compliance Test written by ASA. This measurement is part of the DisplayPort Bundle. ASA strongly recommends that you get the complete DisplayPort Bundle of Special Measurement Apps.
by: ASA
Free
|
DP: LTX-SKEW-INTER_PAIR
DisplayPort
|
This DLL performs the Inter-pair Skew (LTX-SKEW-INTER_PAIR) measurements for DisplayPort as used by the DisplayPort Compliance Test written by ASA. This measurement is part of the DisplayPort Bundle. ASA strongly recommends that you get the complete DisplayPort Bundle of Special Measurement Apps.
by: ASA
Free
|
Clock SSC
Clock SSC
|
This DLL performs Clock Spread Spectrum parameters measurements.
by: ASA
Free
|
Overshoot
Overshoot
|
This DLL performs the voltage overshoot percentage measurement.
by: ASA
Free
|
Undershoot
Overshoot
|
This DLL performs the voltage undershoot percentage measurement.
by: ASA
Free
|
Amplitude and Rise/Fall Balance
Balance
|
This DLL performs the amplitude balance and rise/fall balance measurements.
by: ASA
Free
|
PLL Phase Lock Time
Phase Lock
|
This DLL performs the PLL Phase Lock time measurement.
by: ASA
Free
|
Stepper Motor Count
Stepper Motor Count
|
This DLL performs the Stepper Motor Count measurement.
by: ASA
Free
|
Stimulus-Response
Stimulus-Response Apps allow the user to control one or more pieces of stimulus equipment (such as a pulse generator) from within M1. As new Stimulus-Response Apps are created, they will be made available here. If your company manufacturers a stimulus instrument that you would like to make more marketable by creating a Stimulus-Response App, read more about our Manufacturer's Program.
General
SimBridge - waveform simulation data conversion
SimBridge
|
SimBridge provides the ability to load output files from your favorite waveform simulation tool into M1 OT for analysis.
by: ASA
Contact ASA for pricing
|
External Decode Framework
Decode
|
The External Decode Framework provides both a simple text-format Decode Specification Format as well as a DLL Framework that allow users to create their own serial data decode types for use within M1. The resulting decode types are accessible and usable in exactly the same way as the decode types that are built in to M1 OT. Documentation and examples for both methods are included.
by: ASA
Free
|
Decomposition Performance Explorer
DPE
|
Decomposition Performance Explorer (DPE) is a utility that allows the user to graphically examine the performance of M1 OT's SEEj™ RjDj decomposition algorithm.
by: ASA
Free
|
|
|
