M1 Logo
M1 Apps™
Versatility without limits
Special Measurements

PCIe 1.x/2.0 Measurement Bundle

Revision 1.0, December, 2009
By: ASA
Free

Description

This Measurement Bundle contains a total of 16 Measurement Apps, enabling measurement of all special parameters required by the PCIe 1.x and 2.0 Compliance Apps. Some of the included Apps are combination Apps which measure multiple statistics directly for the Compliance App. Other included Apps provide Compliance Breakout capability for the combination Apps.
If you are looking for the full PCIe Compliance App (which includes this Bundle), ASA recommends that you specifically download that through the Compliance App link below.

Specifications/Details

Spec Level:      Base Specification Rev 2.0, 20 Dec 2006; Base Specification and CEM Specification Rev 1.0a, 15 Apr 2003

App Update Level/Date:      1.0, December 2009

Minimum M1 version required:      v4.00

Measurements Made:

  • Multiple; see list below

Statistics Produced:

  • Multiple; see list below

Assumptions:

  • See individual Measurement App links below

Compliance Breakout™ sub-Apps included with this App:     

  • T-MIN-PULSE - Instantaneous lone pulse width
  • T-MIN-PULSE - Instantaneous lone pulse width (details)
  • combined R/F min, R/F mismatch, and min-pulse
  • L-SKEW - Lane-to-lane skew
  • L-SKEW - Lane-to-lane skew (details)
  • T-TX-RISE-FALL - Transmitter rise and fall time (min)
  • V-RX-cm-ac-p - RX AC common mode voltage
  • RX voltage ratio
  • combined - Vtx-dc-cm/Vtx-line-delta
  • Vtx-cm-ac-p - TX AC common mode voltage (2.5 GT/s)
  • Vtx-cm-ac-p - TX AC common mode voltage, (5.0 GT/s)
  • Overshoot and Ringback
  • RX measurements
  • TX measurements
  • Undershoot and Ringback

This Special Measurement Bundle is part of:     

Features

  • Not Applicable for this App

Comments

Some of the Measurement Apps included in this bundle combine multiple parameters together, and have separate Apps that measure each of those parameters individually as well. The primary purpose of a combined Measurement App is for use in a Compliance App, where it allows the test to proceed as quickly as possible by minimizing the recalculation that would be required for measuring similar parameters in different Apps. The individual Measurement Apps, on the other hand, are primarily intended for use in a Debug scenario, where having all of the statistics and data for a particular parameter is required.

Feedback

Provide feedback to ASA about this App